Dual Stainless Steel Column

Two pressure tested stainless steel columns per solvent, 400L processing capacity until spent. Columns are supplied fully conditioned, ready for use. Spent columns are replaced with new columns

Manifolds, Vacuum & Gas

Internal vacuum and gas manifolds are built into the extruded aluminum frame of the system. Includes a vacuum indicator and gas regulators and pressure relief valves dedicated to each of the solvent flasks to prevent over pressurization of glassware.

Gas Supply

All solvents can be dispensed simultaneously using one main inert gas supply. A red colored 2-way Swagelok valve located on the main gas supply allows operator to shut off all pressure to system in an emergency

Check Valve

Each solvent has it's own in-line check valve to prevent back flow, thus eliminating cross contamination of solvents

3-way valves

Each solvent includes both 2-way and 3-way Swagelok directional valves to control flow of solvents and inert gas

Dispensing Line

A Swagelok metering valve allows a controlled flow of solvent from a braided stainless steel flex line connected to a 24/40 joint. A glass solvent storage flask mounts to the joint for dispensing solvents using standard syringe techniques

In-line Particle Filter

0.2 micron stainless steel particle filter to catch packing material particulates.

Emergency Shut-off Valve

Red colored 2-way valve located on main gas supply, allows operator to quickly cut off all pressure to system.

Pressure Relief Valve

50 psi pressure relief valve with pressure gauge to safeguard against over pressurization of system.

Flow Regular

Dedicated regulator for each solvent with 7 psi pressure relief to safeguard against over pressurization of glassware.

Grounding System

The system is grounded and bonded against ESD, enabling the user to make a cold water pipe, or earth ground. Permits grounding a solvent reservoir while filling it away from the system.